Fujitsu Eternus DX80 S2 - Show Eco-Schedule

Chapter 3 Configuration Settings and Display
3.3 RAID Group Management > show eco-schedule
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
138
show eco-schedule
This command displays a summary of all of the ECO schedules, and ECO schedule events or detailed
information if one or more ECO schedules are specified.
■ Syntax
■ Parameter
■ Output
■ Example(s)
show eco-schedule [-schedule-number schedule_numbers | -schedule-name schedule_names ]
-schedule-number
or
-schedule-name
Optional. This parameter specifies the ECO schedule identifier to display details. One or more
ECO schedule identifiers can be specified. If this parameter is omitted, all the ECO schedules
are displayed. For details, refer to "1.2.13 ECO Schedule Syntax" (page 25)
.
# ECO Schedule
# No. Name
# 0
SC001
A B
# Event
# No. Type Details Time
# 1
Specific-week December 1st week Monday-Friday from [06:00] to [18:00]
C D E F G
A: An ECO schedule number
B: An ECO schedule name
C: An ECO schedule event number
D: An ECO schedule event type
E: An explanation for the ECO schedule event type
F: A starting ECO schedule time
G: An ending ECO schedule time
The following example displays a list of all the registered ECO schedules:
CLI> show eco-schedule
ECO Schedule
No. Name
0 SC001
1 SC002
2 SC003_TEMP