EasyManua.ls Logo

Fujitsu Eternus DX80 S2 - Create Volume

Fujitsu Eternus DX80 S2
756 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3 Configuration Settings and Display
3.4 Volume Management > create volume
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
145
create volume
This command creates volumes in the specified RAID group. When creating two or more volumes at a time,
they can be created in one RAID group based on the "-name" and the "-count" parameters. The created
volumes are formatted automatically.
The "create flexible-tier-volume" command is used to create Flexible Tier Volumes (FTVs).
Syntax
Parameter
Encryption-related functions may not be available for some user environments.
create volume -name
name
{-rg-number
rg_number
| -rg-name
rg_name
}
{-pool-number
pool_number
| -pool-name
pool_name
} -type {open|standard|sdv|sdpv|tpv|wsv}
[-size {
size
{tb|gb|mb}|max}| -virtual-size
virtual_size
{tb|gb|mb}] [-count
count
]
[-copy-protection {enable | disable}] [-attention
attention
] [-encryption {enable|disable}]
[-wide-stripe-size {normal | small}] [-concatenation-order {auto | manual}]
[-volume-number
volume_number
]
-name This parameter specifies a volume name. For details, refer to "1.2.4 Alias Name Syntax" (page
20).
-rg-number
or
-rg-name
This parameter specifies a RAID group identifier to create new volumes. Note that multiple
RAID groups can be specified when "-type wsv" is set. For details, refer to "1.2.8 RAID Group
Syntax" (page 22). This parameter cannot be specified when the "-type tpv" parameter is
specified.
-pool-number
or
-pool-name
This parameter specifies a Thin provisioning pool identifier to create new volumes. For details,
refer to "1.2.5 Thin Provisioning Pool Syntax" (page 20)
. This parameter can be specified when
the "-type tpv" parameter is specified.
-type This parameter specifies the volume type.
open A Standard volume (OPEN) A created "open" type volume is displayed as a
"standard" volume.
standard A normal/open volume (Standard)
sdv A Snap Data Volume (SDV) for Advanced Copy functions
sdpv A Snap Data Pool Volume (SDPV) for Advanced Copy functions
tpv A Thin provisioning volume
wsv A Wide Striping Volume

Table of Contents

Other manuals for Fujitsu Eternus DX80 S2

Related product manuals