Fujitsu Eternus DX80 S2 - Page 157

Chapter 3 Configuration Settings and Display
3.4 Volume Management > show volumes
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
157
The following example displays a list of all the volumes that exist in the Thin provisioning pool named
"TPP001":
CLI> show volumes -pool-name TPP001
Volume Status Type Encryption RG or TPP or FTRP Size(MB) Copy Used Measurements Attention Balancing Used
No. Name No. Name Protection Status (%) Level Capacity(MB)
7 V0L007 Available TPV CM 01 TPP001 1024 disable Normal 100 70 High 0
The following example displays the detailed information for expanded volumes:
CLI> show volumes -mode expansion
Volume Status Type Encryption Expansion RG or TPP or FTRP Size(MB) Reserved Copy
No. Name (Concatenation) No. Name Deletion protection
1 VOL001 Available Standard CM 10 10 RGP010 32768 disable
1/10 10 RGP010 ( 2048) disable
2/10 1 RGP001 ( 2048) disable
3/10 2 RGP002 ( 2048) disable
4/10 1 RGP001 ( 2048) disable
5/10 1 RGP001 ( 2048) disable
6/10 11 RGP011 ( 2048) disable
7/10 13 RGP-#13 ( 2048) disable
8/10 13 RGP-#13 ( 2048) disable
9/10 14 RGP-#14 ( 2048) disable
10/10 14 RGP-#14 ( 2048) disable
5 VOL005 Available Standard OFF 3 10 RGP010 3072 disable
1/ 3 10 RGP010 ( 1024) disable
2/ 3 11 RGP011 ( 1024) disable
3/ 3 10 RGP010 ( 1024) disable
The following example displays an NAA Identifier (UID):
CLI> show volumes -mode uid
Volume Status Type RG or TPP or FTRP Size(MB) UID
No. Name No. Name
1 VOL001 Available Standard 10 RGP010 32768 12345678901234567890123456789012
The following example displays information on an FTV:
CLI> show volumes -mode ftv
Volume Status Type Encryption RG or TPP or FTRP Size(MB) Copy Used Measurements Priority Attention Used
No. Name No. Name Protection Status (%) Capacity(MB)
9 FTV009 Available FTV ON 01 FTRP001 1024 disable Normal 100 70 0 0
<Flexible Tier Sub Pool List>
Flexible Tier Sub Pool Disk RAID Status Total Used Usage
No. Name Attribute Level Capacity Capacity Rate
0 FTSP#0 SSD RAID0 Available 129.00 GB 0.00 MB 60%
1 FTSP#1 Online RAID0 Available 129.00 GB 0.00 MB 40%
2 FTSP#2 NearLine RAID5 Available 129.00 GB 0.00 MB 0%
Volume Status Type Encryption RG or TPP or FTRP Size(MB) Copy Used Measurements Priority Attention Used
No. Name No. Name Protection Status (%) Capacity(MB)
10 VOL010 Available FTV ON 01 FTRP002 1024 disable Attention >500 80 1 0
<Flexible Tier Sub Pool List>
Flexible Tier Sub Pool Disk RAID Status Total Used Volume Used Usage
No. Name Attribute Level Capacity Capacity Capacity Rate
4 FTSP#0 SSD RAID0 Available 129.00 GB 0.00 MB 0.00 MB 0 %
5 FTSP#1 Online RAID0 Available 129.00 GB 0.00 MB 0.00 MB 0 %
6 FTSP#2 NearLine RAID5 Available 129.00 GB 0.00 MB 0.00 MB 0 %
The following example displays WSV concatenation information:
CLI> show volumes -mode wsv
Volume Status Wide Stripe WSV Concatenation RG or TPP or FTRP
No. Name Size No. Name
0 OLU#0 Available Normal 3 1 RLU#1
1/ 3 1 RLU#1
2/ 3 2 RLU#2
3/ 3 3 RLU#3
1 OLU#1 Available Normal 3 1 RLU#1
1/ 3 1 RLU#1
2/ 3 2 RLU#2
3/ 3 3 RLU#3