Fujitsu Eternus DX80 S2 - Start Balancing-Thin-Pro-Volume

Chapter 3 Configuration Settings and Display
3.4 Volume Management > start balancing-thin-pro-volume
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
169
start balancing-thin-pro-volume
This command starts evenly relocating the Thin provisioning volumes (TPVs) among RAID groups.
■ Syntax
■ Parameter
■ Example(s)
start balancing-thin-pro-volume {-volume-number volume_number | -volume-name volume_name }
-volume-number
or
-volume-name
This parameter specifies the TPV to start balancing. Only one parameter can be specified. For
details, refer to "1.2.9 Volume Syntax" (page 22)
.
The following example starts balancing TPV01:
CLI> start balancing-thin-po-bolume -volume-name TPV01