Chapter 3 Configuration Settings and Display
3.4 Volume Management > create flexible-tier-volume
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
177
■ Example(s)
-copy-protection
Optional. This parameter prevents the FTV from being specified as the copy destination. When
"enable" is specified, the FTV cannot be specified as the copy destination. If this parameter is
omitted or "auto" is specified for this parameter, the FTV can be specified as the copy
destination.
enable The FTV is protected.
disable The FTV is not protected.
-volume-number
Optional. This parameter specifies whether the volume number is assigned automatically or
manually. Only one volume number can be specified. If omitted, the volume number is
automatically assigned. This parameter cannot be specified when a value that is "2" or more is
set for the "-count" parameter. If an existing volume number is set, an error occurs.
The following example creates an FTV. FTRP#0 is set for the FTRP to which the FTV is preferentially allocated,
80% is set for the Attention level threshold, and the copy destination volume protection function is enabled:
CLI> create flexible-tier-volume -name FTV0002 -ftrp-number 0 -attention 80 -copy-protection enable
To Next Page
Loading...
