Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show fc-parameters
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
203
The following example shows the parameters displayed for each FC interface port.
In this example, each CA has 4 ports and each CM has 2 CAs:
CLI> show fc-parameters
Port CM#0 CA#0 Port#0 CM#0 CA#0 Port#1 CM#0 CA#0 Port#2 CM#0 CA#0 Port#3
Port Mode CA CA RA RA
Connection FC-AL FC-AL Fabric Fabric
Loop ID Assign Manual(0x01) Auto(Ascending) Auto(Descending) Manual(0x01)
Transfer Rate Auto Negotiation 1Gbit/s 1Gbit/s 1Gbit/s
Frame Size 2048bytes 512bytes - -
Host Affinity Enable Disable - -
Host Response No. - 6 - -
Host Response Name - HP06 - -
Reset Scope I_T_L I_T_L - -
Reserve Cancel at Chip Reset Disable Disable - -
REC Line No. - - 0 1
REC Transfer Mode Sync - - Enable Enable
REC Transfer Mode Stack - - Enable Disable
REC Transfer Mode Consistency - - Disable Enable
REC Transfer Mode Through - - Enable Disable
Port CM#0 CA#1 Port#0 CM#0 CA#1 Port#1 CM#0 CA#1 Port#2 CM#0 CA#1 Port#3
Port Mode CA CA RFCF-RA RFCF-RA
Connection FC-AL FC-AL Fabric Fabric
Loop ID Assign Manual(0x01) Auto(Ascending) Auto(Descending) Manual(0x01)
Transfer Rate Auto Negotiation 1Gbit/s 1Gbit/s 1Gbit/s
Frame Size 2048bytes 512bytes - -
Host Affinity Enable Disable - -
Host Response No. - 6 - -
Host Response Name HP06
Reset Scope I_T_L I_T_L - -
Reserve Cancel at Chip Reset Enable Enable - -
REC Line No. - - - -
REC Transfer Mode Sync - - - -
REC Transfer Mode Stack - - - -
REC Transfer Mode Consistency - - - -
REC Transfer Mode Through - - - -
Port CM#1 CA#0 Port#0 CM#1 CA#0 Port#1 CM#1 CA#0 Port#2 CM#1 CA#0 Port#3
Port Mode CA CA CA CA
Connection FC-AL FC-AL Fabric Fabric
Loop ID Assign Manual(0x01) Auto(Ascending) Auto(Descending) Manual(0x01)
Transfer Rate Auto Negotiation 1Gbit/s 1Gbit/s 1Gbit/s
Frame Size 2048bytes 512bytes 512bytes 512bytes
Host Affinity Enable Disable Disable Disable
Host Response No. - 6 5 5
Host Response Name - HP06 HP05 HP05
Reset Scope I_T_L I_T_L I_T_L I_T_L
Reserve Cancel at Chip Reset Enable Disable Disable Enable
REC Line No. - - - -
REC Transfer Mode Sync - - - -
REC Transfer Mode Stack - - - -
REC Transfer Mode Consistency - - - -
REC Transfer Mode Through - - - -
Port CM#1 CA#1 Port#0 CM#1 CA#1 Port#1 CM#1 CA#1 Port#2 CM#1 CA#1 Port#3
Port Mode CA CA Initiatot Initiator
Connection FC-AL FC-AL Fabric Fabric
Loop ID Assign Manual(0x01) Auto(Ascending) Auto(Descending) Manual(0x01)
Transfer Rate Auto Negotiation 1Gbit/s 1Gbit/s 1Gbit/s
Frame Size 2048bytes 512bytes - -
Host Affinity Enable Disable - -
Host Response No. - 6 - -
Host Response Name - HP06 - -
Reset Scope I_T_L I_T_L - -
Reserve Cancel at Chip Reset Disable Disable - -
REC Line No. - - - -
REC Transfer Mode Sync - - - -
REC Transfer Mode Stack - - - -
REC Transfer Mode Consistency - - - -
REC Transfer Mode Through - - - -
To Next Page
Loading...
