Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > create host-sas-address
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
234
The following example registers the alias "HBA1" for the HBA with SAS address "500605b000b5f344". The
registered host alias is added to host group "HG1":
CLI> create host-sas-address -address 500605b000b5f344 -name HBA1 -host-group-name HG1
The following example registers the alias "HBA1" for the HBA with SAS address "500605b000b5f344". The
registered host alias is added to host group "HG2", which is created in host response #1:
CLI> create host-sas-address -address 500605b000b5f344 -name HBA1 -host-response-number 1 -new-host-group-
name HG2
To Next Page
Loading...
