Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-sas-addresses
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
238
show host-sas-addresses
This command displays a list of all the SAS host identifiers in the system.
■ Syntax
■ Parameter
No parameters.
■ Output
■ Example(s)
show host-sas-addresses
# Host SAS Address Host Response
# No. Name No. Name
# 1
HBA1 500605b000b5f344 1 HP001
A B C D E
A: Host number
B: Host nickname
C: SAS address
D: Assigned the host response number
E: Assigned the host response name
The following example displays a list of all registered SAS host identifiers:
CLI> show host-sas-addresses
Host SAS Address Host Response
No. Name No. Name
1 HBA1 500605b000b5f344 1 HP001
2 HBA2 500605b000b5f348 1 HP001
3 HBA3 500605b000b5f34c 1 HP001
To Next Page
Loading...
