Fujitsu Eternus DX80 S2 - Delete Host-Iscsi-Name

To Next Page

To Previous Page

Chapter 3 Configuration Settings and Display

3.5 Host Interface Management > delete host-iscsi-name

ETERNUS CLI User’s Guide

246

delete host-iscsi-name

This command deletes existing iSCSI host identifier(s).

■ Syntax

■ Parameter

■ Example(s)

delete host-iscsi-name {-host-number

host_numbers

| -host-name

host_names

}

-host-number

-host-name

This parameter specifies the iSCSI host identifiers to be deleted. One or more identifiers can be

specified at the same time. For details, refer to "1.2.10 Host Syntax" (page 23)

The following example deletes the iSCSI hosts with consecutively numbered identifiers #1 - #3:

CLI> delete host-iscsi-name -host-number 1-3

The following example only deletes the host named "HBA2":

CLI> delete host-iscsi-name -host-name HBA2

Other manuals for Fujitsu Eternus DX80 S2