Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show affinity-groups
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
258
show affinity-groups
This command displays a list of existing affinity groups. If there are no parameters specified, the summary list
of all the existing affinity groups is displayed. If affinity groups are specified, then the details of the associated
volumes and LUNs are displayed.
■ Syntax
■ Parameter
■ Output
Multi-group volume information, which indicates whether or not the same volume is defined for multiple
affinity groups, is a status flag.
show affinity-groups [-ag-number
ag_numbers
| -ag-name
ag_names
]
-ag-number
or
-ag-name
Optional. This parameter specifies the affinity group identifiers that will be displayed in
detail. One or more parameters can be specified. If omitted, a summary of all the existing
affinity groups will be displayed.
When the parameter is specified, the details of the specified affinity group are displayed.
# Affinity Group Multi-Group
# No. Name Volumes
# 6 AG006 Yes
A B C
A: Affinity group number
B: Affinity group name
C: It shows whether or not the same volume identifier is defined between affinity groups.
If the same definitions exist, "Yes" is displayed in target affinity groups. Otherwise, "No" is displayed.
To Next Page
Loading...
