Fujitsu Eternus DX80 S2 - Mapping (When Host Affinity Mode Is Not Used)

To Next Page

To Previous Page

Chapter 3 Configuration Settings and Display

3.5 Host Interface Management

ETERNUS CLI User’s Guide

283

3.5.6 Mapping (When Host Affinity Mode is Not Used)

This section explains the commands for mapping when Host Affinity Mode is disabled. When Host Affinity

Mode is not enabled, mapping is the definition of the associated volumes with the host LUNs that applies for

all the connected host servers.

Other manuals for Fujitsu Eternus DX80 S2