Fujitsu Eternus DX80 S2 - Page 290

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show mapping
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
290
■ Example(s)
The following example displays all of the existing mappings:
CLI> show mapping
CM#0 CA#0 Port#0 (Host Affinity Mode Disable)
LUN Volume Status Size(MB)
No. Name
1 1 VOL001 Available 32
2 2 VOL002 Available 32
3 3 VOL003 Available 32
CM#0 CA#0 Port#1 (Host Affinity Mode Enable)
CM#1 CA#0 Port#0 (Host Affinity Mode Disable)
LUN Volume Status Size(MB)
No. Name
3 1 VOL001 Available 32
4 2 VOL002 Available 32
5 3 VOL003 Available 32
CM#1 CA#0 Port#1 (Host Affinity Mode Enable)
The following example only displays the mappings associated with the volume named "VOL001":
CLI> show mapping -volume-name VOL001
CM#0 CA#0 Port#0 (Host Affinity Mode Disable)
LUN Volume Status Size(MB)
No. Name
1 1 VOL001 Available 32
CM#1 CA#0 Port#0 (Host Affinity Mode Disable)
LUN Volume Status Size(MB)
No. Name
3 1 VOL001 Available 32
The following example displays the mappings associated with host interface port #0 on CM#0 CA#0:
CLI> show mapping -port 000
CM#0 CA#0 Port#0 (Host Affinity Mode Disable)
LUN Volume Status Size(MB)
No. Name
1 1 VOL001 Available 32
2 2 VOL002 Available 32
3 3 VOL003 Available 32