Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show port-groups
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
315
show port-groups
This command displays a list of existing affinity groups.
■ Syntax
■ Parameter
■ Output
show port-groups
[-port-group-number
port_group_numbers
| -port-group-name
port_group_names
| -all]
-port-group-number
or
-port-group-name
Optional. This parameter specifies the port group identifiers that will be displayed in detail.
One or more parameters can be specified. If omitted, a summary of all the existing port groups
will be displayed. For details, refer to "1.2.15 Port Group Syntax" (page 26)
.
-all Optional. When this parameter is specified, the details of all the existing port groups are
displayed.
When the parameter is omitted, a summary of all the existing port groups is displayed.
# Port Group CA Type
# No. Name
# 0 pg FC
A B C
# 1 pg1 FC
# 2 pg01 FC
# 3 pg0d1 FC
# 4 FCoEPG#0 FCoE
A: Port group number
B: Port group name
C: CA type
To Next Page
Loading...
