Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set lu-qos-schedule
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
345
■ Example(s)
-event-to Optional. This parameter specifies that the QoS schedule will end at a specific time. The format
is "hhmm". "hh" is the ending hour (00 – 23) and "mm" is the ending minute (00, 10, 20, 30,
40, or 50).
The following example creates an QoS schedule. The QoS schedule number is 0. The QoS schedule will apply
every day from 06:00 to 18:00:
CLI> set lu-qos-schedule -schedule-number 0 -event-type every-day -event-from 0600 -event-to 1800
The following example deletes the QoS schedule:
CLI> set lu-qos-schedule -schedule-number 0 -event-type none
To Next Page
Loading...
