Fujitsu Eternus DX80 S2 - Show Lu-Qos-Schedule

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show lu-qos-schedule
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
346
show lu-qos-schedule
This command shows the details of the QoS schedule.
■ Syntax
■ Parameter
■ Output
■ Example(s)
show lu-qos-schedule [-schedule-number schedule-number ]
-schedule-number
Optional. This parameter specifies the QoS schedule number to display details. One or more
QoS schedule numbers can be specified. If this parameter is omitted, all the QoS schedules are
displayed.
# No. Type Details Time
# 0 Every-day from [18:10] to [12:20]
# 1 Every-week Monday-Tuesday from [00:00] to [18:30]
# 2 Specific-day 1day(s) from Every-month 15 from [00:40] to [18:30]
# 512 Specific-day 1day(s) from December 31 from [00:00] to [23:50]
# 2047
Specific-week Every-month last week Monday-Sunday from [00:00] to [06:00]
A B C D E
A: QoS schedule number
B: QoS schedule event type
C: Explanation for the QoS schedule event type
D: Starting QoS schedule time
E: Ending QoS schedule time
The following example displays the QoS schedules:
CLI> show lu-qos-schedule
No. Type Details Time
0 Every-day from [18:10] to [12:20]
1 Every-week Monday-Tuesday from [00:00] to [18:30]
2 Specific-day 1day(s) from Every-month 15 from [00:40] to [18:30]
512 Specific-day 1day(s) from December 31 from [00:00] to [23:50]
2047 Specific-week Every-month last week Monday-Sunday from [00:00] to [06:00]