Fujitsu Eternus DX80 S2 - Show Role

Chapter 4 Function/System Settings and Display
4.1 User Management > show role
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
361
show role
This command displays all the registered user-defined role information.
■ Syntax
■ Parameter
No parameters.
■ Output
■ Example(s)
show role
# Role Name type Policies
Role1 all [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17]
A B C
A: User-defined role name
B: Role type (not supported)
C: Assigned policies
The following example displays all the registered user-defined roles:
CLI > show role
Role Name type Policies
Monitor all [1 ]
Admin all [1,2,3,4,5,6,7, 10,11,12,13, 15 ]
StorageAdmin all [1,2,3,4,5,6,7 ]
AccountAdmin all [ 11,12 ]
SecurityAdmin all [1, 13, 15 ]
Maintainer all [1,2,3,4,5,6,7, 10, 15,16 ]
Software all [ 17]