EasyManua.ls Logo

Fujitsu Eternus DX80 S2 - Page 384

Fujitsu Eternus DX80 S2
756 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
384
[Example]
Performing copies of seven generations with day-by-day rotation.
When setting the SnapOPC+ session of volume#0100 for Monday,
The SnapOPC+ session for the last Monday is deleted.
The SDP used for the SnapOPC+ session for the last Monday is released and a new SnapOPC+ session is set
as a new backup point.
If the update size exceeds the SDV capacity, additional capacity is allocated from the SDPV area in units of
SDPE.
Copy session check
Check the status of the copy sessions by using the "show advanced-copy-sessions" command.
The "show advanced-copy-sessions" command displays the status of all the copy sessions.
[Example]
Copy session deletion
Delete unnecessary copy sessions by using the "stop advanced-copy" command.
SDPs used by the deleted copy sessions are released.
Data in the copy destination volume loses its meaning (becomes undefined).
[Example]
Deleting the copy session with copy session ID 1.
(Monday)
CLI> start advanced-copy -source-volume-number 0 -destination-volume-number 100
(Tuesday)
CLI> start advanced-copy -source-volume-number 0 -destination-volume-number 101
(Wednesday)
CLI> start advanced-copy -source-volume-number 0 -destination-volume-number 102
(Thursday)
CLI> start advanced-copy -source-volume-number 0 -destination-volume-number 103
(Friday)
CLI> start advanced-copy -source-volume-number 0 -destination-volume-number 104
(Saturday)
CLI> start advanced-copy -source-volume-number 0 -destination-volume-number 105
(Sunday)
CLI> start advanced-copy -source-volume-number 0 -destination-volume-number 106
(Monday)
CLI> start advanced-copy -source-volume-number 0 -destination-volume-number 100
(Tuesday)
CLI> start advanced-copy -source-volume-number 0 -destination-volume-number 101
:
(Daily copy operations are repeated hereinafter)
:
CLI> show advanced-copy-sessions
CLI> stop advanced-copy -session-id 1 -delete-mode normal

Table of Contents

Other manuals for Fujitsu Eternus DX80 S2

Related product manuals