Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > show advanced-copy-license
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
387
show advanced-copy-license
This command displays the registration status of the Advanced Copy license.
■ Syntax
■ Parameter
No parameters.
■ Output
■ Example(s)
show advanced-copy-license
# Copy Status Trial registration Trial expiration
# Type Date Date
# Local [Trial]
2010/11/27 (1) 2011/01/05
A B C D
# Remote [Registered] - -
E F G H
A: Local copy license status "-", "Free/VAAI" (only for the ETERNUS DX80 S2/DX90 S2), "VAAI", "Trial" and
"Registered".
B: Registration date of the trial version license for local copy. "-" is displayed for license that is not the trial
version.
C: Local copy, how many times the trial license is registered. If the license is not trial, it does not appear.
D: Local copy, trial license expiration date. If the license is not trial, it shows as "-".
E: Remote copy license status "-", "Trial" and "Registered".
F: Registration date of the trial version license for remote copy. "-" is displayed for license that is not the trial
version.
G: Remote copy, how many times the trial license is registered. If the license is not trial, it does not appear.
H: Trial period of the trial version license for remote copy. "-" is displayed for license that is not the trial version.
The following example displays the registration status of the Advanced Copy license:
CLI> show advanced-copy-license
Copy Status Trial registration Trial expiration
Type Date Date
Local [Trial] 2010/11/27 (1) 2011/01/05
Remote [Registered] - -
The following example displays the status of the "VAAI mode" Advanced Copy license:
CLI> show advanced-copy-license
Copy Status Trial registration Trial expiration
Type Date Date
- [VAAI] - -
To Next Page
Loading...
