Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > set host-port-mode
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
420
■ Example(s)
The following example switches host interface port #0 on CM#1 CA#0 to RA mode:
CLI> set host-port-mode -port 100 -mode ra
The following example reverts port #3 on CM#1 CA#0 to CA mode:
CLI> set host-port-mode -port 103 -mode ca
The following example switches all the host interface ports to RA mode:
CLI> set host-port-mode -port all -mode ra
To Next Page
Loading...
