Fujitsu Eternus DX80 S2 - Page 43

Chapter 2 Status Display
2.1 Storage System Status > show fru-ce
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
43
BUD# Parts Number
BUD parts number
BUD# Serial Number
BUD serial number
BUD# Hard Revision
BUD hard revision
CM FAN CM FAN status and the status code (ETERNUS DX410 S2/DX440 S2 only)
CA# Parts Number
CA parts number
CA# Serial Number
CA serial number
CA# Hard Revision
CA hard revision
CA Slot# CA Slot status and the status code
DMA Port# DMA Port status and the status code
BIOS# BIOS status and the status code
CM EXP# CM EXP status and the status code (ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2,
and ETERNUS DX8100 S2 only)
CM EXP# InPort#
CM EXP InPort status and the status code
(ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2, and ETERNUS DX8100 S2 only)
SAS Cable# (OUT)
SAS Cable# (OUT) status and the status code
(ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2, and ETERNUS DX8100 S2 only)
CM RTC CM RTC status and the status code
CM NVRAM
CM NVRAM status and the status code
CM FPGA CM FPGA status and the status code
CM LAN Port#
CM LAN Port status and the status code ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440
S2, and ETERNUS DX8100 S2 only
DI Port# DI Port status and the status code
NAND Controller
NAND controller status and the status code
(ETERNUS DX80 S2/DX90 S2 only)