Fujitsu Eternus DX80 S2 - Delete Rec-Disk-Buffer

To Next Page

To Previous Page

Chapter 4 Function/System Settings and Display

4.2 Advanced Copy Management > delete rec-disk-buffer

ETERNUS CLI User’s Guide

446

delete rec-disk-buffer

This command is used to delete the RAID group(s) of the REC disk buffer.

■ Syntax

■ Parameter

■ Example(s)

delete rec-disk-buffer { -rg-number

rg_numbers

| -rg-name

rg_names

}

-rg-number

-rg-name

This parameter specifies the RAID group identifier of the REC disk buffer for assignment of the

REC buffer. One or more RAID groups can be specified. For details, refer to "1.2.8 RAID Group

Syntax" (page 22).

The following example deletes the REC disk buffer that was created as RAID group number 0:

CLI> delete rec-disk-buffer -rg-number 0

Other manuals for Fujitsu Eternus DX80 S2