Chapter 4 Function/System Settings and Display
4.3 Network Management > delete snmp-manager
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
474
delete snmp-manager
This command deletes the SNMP manager settings.
This command is not available when the SNMP manager setting that is to be deleted is already used for an
SNMP community, an SNMP user, or an SNMP trap.
■ Syntax
■ Parameter
■ Example(s)
delete snmp-manager -manager-number
manager-numbers
-manager-number
This parameter specifies the SNMP manager settings to delete. One or more numbers can be
specified by using "," or "-".
Example:
-manager-number 1,2,4
-manager-number 6-9
The following example deletes the #4 SNMP manager setting:
CLI> show snmp-manager
No. IP address
1 10.0.0.1
2 172.20.235.1
3 192.168.0.21
4 172.20.235.1
5 192.168.10.11
6 192.168.0.254
CLI> delete snmp-manager -manager-number 4
CLI> show snmp-manager
No. IP address
1 10.0.0.1
2 172.20.235.1
3 192.168.0.21
5 192.168.10.11
6 192.168.0.254
To Next Page
Loading...
