Chapter 4 Function/System Settings and Display
4.3 Network Management > set snmp-user
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
486
In the following example, user FooVar is set to SNMP view "xview4", the authentication method is set to
MD5, and encryption is enabled:
CLI> set snmp-user -user FooVar -view xview4 -authentication enable -authentication-method md5
Current Authentication Password:
New Authentication Password:
Confirm Authentication Password:
Current Encryption Password:
New Encryption Password:
Confirm Encryption Password:
To Next Page
Loading...
