Chapter 4 Function/System Settings and Display
4.3 Network Management > set email-notification
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
506
set email-notification
This command sets up parameters relating to E-mail notification functions.
■ Syntax
■ Parameter
set email-notification [-send {enable|disable}] [-port {maintenance|remote|fst}]
[-port-number
port_number
] [-server
smtp_server
] [-authentication {none|auto|cram-md5|plain|login}]
[-user
user_name
][-from
mail_address
] [-to1
address
] [-to2
address
] [-to3
address
] [-to4
address
]
[-to5
address
] [-text-count
count
] [-text1
strings
] [-text2
strings
] [-text3
strings
] [-text4
strings
]
[-text5
strings
] [-text6
strings
] [-text7
strings
] [-text8
strings
] [-text9
strings
] [-text10
strings
]
[-retry-count
count
] [-retry-interval
interval
] [-timeout
seconds
] [-partial-mode {enable|disable}]
[-partial-size
size
] [-send-log {enable|disable}] [-iom-log {enable|disable}]
[-customer-info {enable|disable}]
-send Optional. This parameter specifies the E-mail notification mode. It specifies whether the E-
mail notification function is enabled or not. If this parameter is omitted, the status is not
changed. The initial value is disabled. All necessary parameters to send E-mail must be
specified when enabling this parameter.
enable E-mail notification is enabled.
disable E-mail notification is disabled (default).
-port Optional. This parameter specifies the Ethernet port to connect to an SMTP Server. If omitted,
the existing setting is not changed. For details, refer to "1.11 Note for Specifying FTP Server"
(page 31).
maintenance
MNT port
remote RMT port
fst FST port (ETERNUS DX410 S2/DX440 S2 only)
-port-number
Optional. This parameter specifies the port number to connect to an SMTP server. If omitted,
the existing setting is not changed. The initial value is 25.
-server Optional. This parameter specifies the SMTP server address. Up to 64 letters can be specified.
The server name format is IPv4 standard notation (a base 256 "d.d.d.d" string), IPv6 address
format, or a fully qualified domain name. The types of IPv6 addresses that can be specified are
global addresses (including 6to4 addresses), link local addresses, and unique local addresses.
If omitted, the existing setting is not changed.
Example: -server 192.168.1.20
Example: -server fd80::abd0:223:ad
Example: -server foo.bar
To Next Page
Loading...
