Fujitsu Eternus DX80 S2 - Page 537

Chapter 4 Function/System Settings and Display
4.3 Network Management > export ssl-certificate-request
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
537
-csr-filename
Optional. This parameter specifies the filename to store the CSR file. If omitted, "server.csr"
(default name) is used. If the same filename already exists, it is overwritten.
The following conversion specifications, which begin with a percent character, are replaced by
their corresponding values at execution time. If other conversion strings are specified, this
command terminates abnormally with an error message.
%s Serial number of the system
Example:
server_%s.csr  server_123456789012.csr
%d Current date
Example:
server_%d.csr  server_20100316.csr (March 16, 2010)
%t Current time
Example:
server_%t.csr  server_123456.csr (12:34:56)
%% Percent character
Example:
server%%.csr  server%.csr
-key-filename
Optional. This parameter specifies the filename to store the key file. If omitted, "server.key"
(default file) is used. If the same filename already exists, it is overwritten.
The following conversion specifications, which begin with a percent character, are replaced by
their corresponding value at the time of execution. If other conversion strings are specified,
this command terminates abnormally with an error message.
%s Serial number of the system
Example:
server_%s.key  server_123456789012.key
%d Current date
Example:
server_%d.key  server_20100316.key (March 16, 2010)
%t Current time
Example:
server_%t.key  server_123456.key (12:34:56)
%% Percent character
Example:
server%%.key  server%.key