EasyManua.ls Logo

Fujitsu Eternus DX80 S2 - Page 538

Fujitsu Eternus DX80 S2
756 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4 Function/System Settings and Display
4.3 Network Management > export ssl-certificate-request
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
538
-key-length Optional. This parameter specifies the bit length of the generating SSL server key. Only one
value can be specified. If this parameter is omitted, 2048 (default value) is used for the key
length.
1024 Key length is 1024bits.
2048 Key length is 2048bits. (Default value)
4096 Key length is 4096bits.
-country-name
Specify a country using two uppercase characters. "JP" indicates Japan. For other countries,
refer to ISO3166-1.
-state-province-name
Specify the state where the organization is located. Up to 63 characters can be specified.
-locality-name
Specify the area where the organization is located. Up to 63 characters can be specified.
-organization-name
Specify the organization name. Up to 63 characters can be specified.
-organization-unit-name
Specify the department name of the organization. Up to 63 characters can be specified.
-common-name
This parameter specifies an IP address or domain name that accesses HTTPS for the MNT port
or the RMT port. The IP address should be written in IPv4 standard notation (a base 256
"d.d.d.d" string) or IPv6 address format. The domain name should be written in full-domain
notation (FQDN). Only one parameter can be specified.
Example:
foo.var
192.168.1.1
2001:1b::430:db0
-subject-alt-name
Optional. This parameter specifies the IP address or domain name that can access HTTPS for
the MNT port or the RMT port. To specify the SNMP manager IP address, use IPv4 standard
notation (a base 256 "d.d.d.d" string), the IPv6 address format, or fully qualified domain name
(FQDN). One or more FQDNs or IP addresses can be specified. The string length of all the
FQDNs or IP addresses with this parameter delimiters should be within 511bytes.
Example:
foo.var.com (11bytes) Correct
foo.var.com, 192.168.1.1 (11 +1 +11bytes) Correct
jugemujugem...co.jp (511bytes) Correct
jugemujugemu...co.jp (512bytes) Incorrect
jugemujugem...co.jp, foo.var.com (511 +1 +11bytes) Incorrect
-indicator Optional. This parameter specifies whether the progress indicator is displayed. If omitted, the
progress indicator is displayed.
enable Progress indicator is displayed.
disable Progress indicator is not displayed.

Table of Contents

Other manuals for Fujitsu Eternus DX80 S2

Related product manuals