EasyManua.ls Logo

Fujitsu Eternus DX80 S2 - Page 548

Fujitsu Eternus DX80 S2
756 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4 Function/System Settings and Display
4.3 Network Management > show ais-connect
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
548
Example(s)
A: It indicates whether the AIS Connect function is enabled.
B: It indicates the LAN port on the ETERNUS DX Disk storage system that communicates with the AIS Connect
server.
C: It indicates whether logs are automatically sent.
D: It indicates the code and name of the country where the ETERNUS DX Disk storage system is shipped. If it is not
set, a hyphen (-) is displayed.
E: It indicates the code and name of the country in which the support office for the ETERNUS DX Disk storage
system is located. If it is not set, "Undefined" is displayed.
F: It indicates whether server certification is disabled.
G: It indicates the FQDN or IP address (IPv4) of the proxy server. If it is not set, a hyphen (-) is displayed.
H: It indicates the proxy server port number. If it is not set, a hyphen (-) is displayed.
I: It indicates the type of communication with the proxy server (HTTP / SOCKS). If it is not set, a hyphen (-) is dis-
played.
J: It indicates the user name for proxy authentication.
K: It indicates whether a remote session from the AIS Connect server to the ETERNUS DX Disk storage system is
allowed.
L: It indicates the timeout interval for remote sessions. A number between 1 to 24 or "Unlimited" is displayed.
M: Root certification issuer
N: Starting date of the validity period for the root certification
O: Ending date of the validity period for the root certification
The following example displays the operation environment of AIS Connect:
CLI> show ais-connect
AIS Connect Function [Enable]
Port [MNT]
Send Log(Auto) [Enable]
Country Of Installation [392 (JAPAN)]
Service Contract Responsibility [392 (JAPAN)]
SSL Server Certification [Enable]
Proxy Server [foo.bar]
Proxy Port Number [123]
Proxy Type [HTTP]
Proxy User Name [User1]
Remote Session [Permit]
Remote Session Timeout(hour) [3]
<Trusted Root Certification Authorities>
Issuer Name [Fujitsu Certification Authority]
Valid From [2012-08-17 13:04:47]
Valid To [2015-08-17 13:04:47]
Issuer Name [Fujitsu Certification Authority2]
Valid From [2012-08-17 13:04:47]
Valid To [2015-08-17 13:04:47]

Table of Contents

Other manuals for Fujitsu Eternus DX80 S2

Related product manuals