Fujitsu Eternus DX80 S2 - Show Config-Information

Chapter 5 Information Settings and Display
5.3 Maintenance > show config-information
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
648
show config-information
This command displays a list of the configuration information that is stored in the system.
■ Syntax
■ Parameter
No parameters.
■ Output
■ Example(s)
show config-information
# Information Date Note
# Two Time Before - -
# One Time Before 2008-07-20 23:11:00 aabbccdd
# Latest 2008-07-22 15:26:45
-
A
A: Configuration date.
If the system has no configuration information, a hyphen (-) is displayed here.
The following example displays a list of the configuration information:
CLI > show config-information
Information Date Note
Two Time Before - -
One Time Before 2008-07-20 23:11:00 aabbccdd
Latest 2008-07-22 15:26:45 -