Fujitsu Eternus DX80 S2 - Page 664

Chapter 5 Information Settings and Display
5.4 Utility > show diagnosis
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
664
The following example displays the detailed results of the RAID diagnosis:
CLI> show diagnosis -type raid-group -rg-name RGP001
RAID Group Number : 0
RAID Group Name : RGP001
Recovery Mode : ON
Diagnosis Status : Diagnosing
Result : Normal
Progress : 34%
Diagnosed RAID Group LBA Count : 0x0000000008803072
Total RAID Group LBA Count : 0x0000000025182720
Succeeded in Restoration : 0
Failed in Restoration : 0
Error Information
Error Succeeded / Failed (in Restoration)
Compare Error : 0 / 0
Medium Error : 0 / 1
CRC Error : 0 / 0
Block ID Error : 0 / 0
Bad Data Flag Error : 0 / 0
Error Detail Information(1/1)
Volume Number : 1023
Volume Name : VOL-001
Status : Recovered Medium Error
Volume LBA : 0x0000000010000000
RAID Group LBA : 0x0000000100000000
Error Strip No. : 0x00000000
Location : DE#1-Disk#10
Error Disk LBA : 0x00000100