Chapter 2 Status Display
2.1 Storage System Status > show hardware-information
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
67
show hardware-information
This command displays the hardware information for each enclosure and sub-component.
■ Syntax
■ Parameter
No parameters.
■ Output
show hardware-information
For each enclosure, the following items are displayed. All possible drive enclosures are displayed,
irrespective of whether or not they are currently installed. Drive enclosures that do not exist are indicated by
hyphens.
Serial No. Serial number embedded in the enclosure
Other Information
Individual identifier embedded in the controlling Fujitsu enclosure.
For each component, the following items are displayed. For single controller models, both controller module
#1 and expander module #1 are indicated by hyphens. Information is not displayed for drive enclosures that
do not exist.
Part No. Part number embedded in the component
Serial No. Serial number embedded in the component
Version Hardware revision of the component
For each component, the following items are displayed. For single controller models, both BRT#1 and
QSFP#1 are indicated by hyphens. Information is not displayed for BRT that do not exist.
Part No. Part number embedded in the component
Serial No. Serial number embedded in the component
Vendor Name
Vendor Name embedded in the component
To Next Page
Loading...
