Fujitsu Eternus DX80 S2 - Release Reservation

To Next Page

To Previous Page

Chapter 5 Information Settings and Display

5.4 Utility > release reservation

ETERNUS CLI User’s Guide

676

release reservation

This command releases the volumes that have been reserved by host servers (persistent reservation). The

reservation key is also deleted.

■ Syntax

■ Parameter

■ Example(s)

release reservation {-volume-number

volume_numbers

| -volume-name

volume_names

}

-volume-number

-volume-name

This parameter specifies the volume identifiers to be released. One or more volumes can be

specified at the same time. For details, refer to "1.2.9 Volume Syntax" (page 22)

The following example releases the volume named "VOL001" that has been reserved by the host servers:

CLI > release reservation -volume-name VOL001

identifiers #5-#25 that have been reserved by the host servers:

CLI > release reservation -volume-number 5-25

Other manuals for Fujitsu Eternus DX80 S2