Chapter 3 Configuration Settings and Display
3.1 Thin Provisioning Pool Management > delete thin-pro-pool
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
78
delete thin-pro-pool
This command deletes an existing Thin provisioning pool(s). A Thin provisioning pool cannot be deleted if one
or more volumes exist in the pool. All volumes in the specified Thin provisioning pool must be deleted before
the Thin provisioning pool is deleted.
■ Syntax
■ Parameter
■ Example(s)
delete thin-pro-pool {-pool-number
pool_numbers
| -pool-name
pool_names
}
-pool-number
or
-pool-name
This parameter specifies the Thin provisioning pool identifiers. One or more Thin provisioning
pool identifiers can be specified. For details, refer to "1.2.5 Thin Provisioning Pool Syntax"
(page 20).
The following example deletes Thin provisioning pool #01:
CLI> delete thin-pro-pool -pool-number 01
The following example deletes the Thin provisioning pool named TPP05:
CLI> delete thin-pro-pool -pool-name TPP05
To Next Page
Loading...
