Fujitsu Eternus DX80 S2 - Release Eco-Thin-Pro-Pool

Chapter 3 Configuration Settings and Display
3.1 Thin Provisioning Pool Management > release eco-thin-pro-pool
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
89
release eco-thin-pro-pool
This command releases the ECO schedule that is associated with a specific Thin provisioning pool(s).
■ Syntax
■ Parameter
■ Example(s)
release eco- thin-pro-pool {-pool-number pool_numbers | -pool-name pool_names }
-pool-number
or
-pool-name
This parameter specifies the Thin provisioning pool identifiers. One or more Thin provisioning
pool identifiers can be specified. For details, refer to "1.2.5 Thin Provisioning Pool Syntax"
(page 20).
The following example releases an ECO schedule associated with the Thin provisioning pool named
"TPP001":
CLI>release eco-thin-pro-pool -pool-name TPP01
The following example releases an ECO schedule associated with Thin provisioning pool #01- #05 at the
same time:
CLI>release eco-thin-pro-pool -pool-number 01-05