Fujitsu ETERNUS DX8100 S3 - Page 162

Chapter 3 Component Status
3.18 Fan Expander Module Detail
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
162
• EXP#n Active EC
The EC number of Expander#n (n=0,1) that is currently running is displayed.
• EXP#n Next EC
The EC number of FEM Expander#n (n=0,1) that is to be run after the next power-on is displayed.
• EXP#n Firmware Version
The revision number of the firmware that is currently running in FEM Expander#n (n=0,1) is displayed.
■ Internal Parts
The following items are displayed in the Main area:
• Parts
The component information is displayed.
• Status
The component status is displayed. Refer to "A.5 Component Status" (page 410)
for details.
• Error Code
The component error code is displayed.