Fujitsu ETERNUS DX8100 S3 - Page 205

Chapter 4 Volume Status
4.3 Performance (QoS)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
205
• Name
The volume name is displayed.
Click this item to display the [Volume Detail] screen. Refer to "4.11 Volume Detail (Basic)" (page 223)
for
display items.
• Type
The volume type is displayed.
- Standard
- TPV
- FTV
- WSV
- SDV
• Usage
The usage of the volume is displayed.
- Block
The volumes that are used for the SAN.
- Block/Dedup
The Deduplication/Compression Volumes.
- File
The volumes that are used for the NAS.
• IOPS
IOPS, the total number of reads and writes per second, is displayed.
• Throughput
Throughput, the total amount of read data and write data transferred per second, is displayed.
• Bandwidth Limit
The bandwidth limit for the volume is displayed.
If the bandwidth limit has not been configured for the volume, the default value ("Unlimited") is displayed.
Filter setting
Filter Description
Name
Input the volume name that is to be displayed.
When not using the volume name for filtering, leave this item blank.
Type
Select the volume type that is to be displayed.
"TPV" and "FTV" are displayed as options only when the Thin Provisioning function is
enabled.
Usage Select the usage of the volume that is to be displayed.