Chapter 4 Volume Status
4.15 Volume Detail (Used RAID Group)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
235
4.15 Volume Detail (Used RAID Group)
The detailed information of LUN concatenation or WSV is displayed. This screen is not displayed when the vol-
ume type is "TPV" and "FTV".
The information for a RAID group that is being used is displayed in the following order. Note that sorting of
the display contents is not available.
• When the volume type is "Standard", volumes are displayed in concatenation order with LUN
Concatenation
• When the volume type is "WSV", volumes are displayed according to the concatenation number of the WSV
Unit (the order of allocating the WSV unit to the RAID group)
The following items are displayed in the Main area:
• RAID Group No.
The RAID group number to which the concatenated volume or WSV Unit belongs is displayed.
• RAID Group Name
The RAID group name to which the concatenated volume or WSV Unit belongs is displayed.
• Capacity
The capacity of the concatenated volume or the WSV Unit is displayed. The volume capacity is displayed
with "MB", "GB", or "TB". The unit of measurement for the capacity is determined according to the actual
volume size. The capacity is also displayed with "KB".
• Capacity on RAID Group
The capacity that is secured in the RAID group by the concatenated volume or the WSV Unit is displayed.
The volume capacity is displayed with "MB", "GB", or "TB". The unit of measurement for the capacity is
determined according to the actual volume size. The capacity is also displayed with "KB".
To Next Page
Loading...
