Chapter 5 Connectivity Status
5.8 NAS
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
300
● Local Group
• ID
The group ID for the local group is displayed.
For details about group IDs for local groups that are automatically created in the ETERNUS DX, refer to
" Special group" (page 300)
.
• Name
The local group name is displayed.
For details about group names for local groups that are automatically created in the ETERNUS DX, refer to
" Special group" (page 300)
.
• User(s) who belongs to a Primary Group
The local user names that belong to the primary group are displayed.
If multiple local user names exist, all factors are separated with a "," (comma) and displayed. If no local
user name exists, a "-" (hyphen) is displayed.
If the local user is not registered in the ETERNUS DX, the field is blank.
• User(s) who belongs to a Secondary Group
The local user names that belong to the secondary group are displayed.
If multiple local user names exist, all factors are separated with a "," (comma) and displayed. If no local
user name exists, a "-" (hyphen) is displayed.
If the local user is not registered in the ETERNUS DX, the field is blank.
Special group
*1: "BUILTIN groups" are groups that are included in the ETERNUS DX as standard. If local users belong to these groups,
the backup software "Arcserve Backup" can be used to back up or restore files by using the ETERNUS DX as a backup
device.
Local group ID Local group name Description
450 shareuser$
The local user "shareuser$" belongs to this group.
This group is automatically created when the controller firmware
is updated from controller firmware version V10L51 or earlier
while the authentication server is not being used (or all users
share the same fixed user account) to V10L53 or later. Regular
local users can also belong to this group.
451 sharegroup$
The initial primary group to which the created local users belong.
This group is automatically created when local users are created.
If all local users that belong to this group are deleted, this group
is automatically deleted.
If the local user "shareuser$" is deleted and then added again,
the recreated "shareuser$" belongs to this group.
1002 BUILTIN_Administrators
One of the BUILTIN groups (*1). Users who belong to this group
can execute all operations for all domain controllers within the
domain.
1003 BUILTIN_Users
One of the BUILTIN groups (*1). Users who belong to this group
can execute most of the general operations.
1004 BUILTIN_BackupOperators
One of the BUILTIN groups (*1). Users who belong to this group
can perform file backups and file recoveries regardless of the
access permissions for all the files of domain controllers within
the domain.
To Next Page
Loading...
