Fujitsu ETERNUS DX8100 S3 - Page 326

Chapter 7 Thin Provisioning Pool Status
7.1 Thin Provisioning Pools
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
326
The following items are displayed in the Main area:
• No.
The TPP number is displayed. Click this item to display the screen shown in "7.1.2 Thin Provisioning Pool
Detail (Basic)" (page 328).
• Name
The TPP name is displayed. Click this item to display the screen shown in "7.1.2 Thin Provisioning Pool
Detail (Basic)" (page 328).
• Drive Type
The type of drive that is used to configure the TPP is displayed.
- Online
SAS disks
- Nearline
Nearline SAS disks
- SSD
SSDs (*1)
- Online SED
Online SEDs
- Nearline SED
Nearline SEDs
- SSD SED
SSD SEDs
*1: "SSD" is displayed regardless of the actual SSD type (SSD-M/SSD-L/SSD).
• RAID Level
The level of RAID group that configures the TPP is displayed.
- High Performance (RAID1+0)
- High Capacity (RAID5)
- High Reliability (RAID6)
- High Reliability (RAID6-FR)
- Mirroring (RAID1)
- Striping (RAID0)
• Status
The TPP status is displayed. Refer to "A.4 Thin Provisioning Pool Status" (page 409)
for detailed information
of TPP status.
• Used Status
The usage of TPP is displayed.
- Normal
TPP usage does not exceed the "Attention" threshold.
- Attention
TPP usage exceeds the "Attention" threshold but does not exceed the "Warning" threshold.
- Warning
TPP usage exceeds the "Warning" threshold.