Chapter 8 Advanced Copy Status
8.2 Advanced Copy (All Local Sessions)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
366
8.2.4 SnapOPC
This function displays detailed information for SnapOPC sessions.
The following items are displayed in the Main area:
• SDP No.
The Snap Data Pool number, which is used when the copy destination SDV capacity is insufficient, is
displayed. If the status is " Reserved" or when the copy destination is not an SDP, a "-" (hyphen) is
displayed.
• SDP Used Capacity
The used capacity of Snap Data Pool is displayed. If the status is " Reserved" or when the copy destina-
tion is not an SDP, a "-" (hyphen) is displayed.
Refer to "8.2 Advanced Copy (All Local Sessions)" (page 361) for the display items that are not described in
this section.
Refer to "8.2 Advanced Copy (All Local Sessions)" (page 361) for the display items that are not described in
this section.
To Next Page
Loading...
