EasyManua.ls Logo

Fujitsu ETERNUS DX8100 S3 - Page 379

Fujitsu ETERNUS DX8100 S3
423 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 8 Advanced Copy Status
8.6 Virtual Volume Sessions
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
379
- CopyDiffs
Comparison result (the difference of a data) between two VVOLs during a Snapshot session is being
copied to the third VVOL.
Status
The copy session status is displayed.
- Active
Operating normally
- Reserved
Session ID reserved
- Error Suspend
Copy canceled due to an error
- Unknown
A status other than the ones listed above
Merging
When the data merge process for a Snapshot is being performed, "Yes" is displayed.
If not, "No" is displayed. The "merge process" targets deleted data of a specific generation (except the
oldest generation) and copies the difference in data to the previous generation.
When the session type is not "Snapshot" or when the copy status is " Reserved", a "-" (hyphen) is
displayed.
Generation
The generation and total number of generations of the Snapshot session are displayed.
When the session type is not "Snapshot" or when the copy status is " Reserved", a "-" (hyphen) is
displayed.
Error Code
The error code is displayed when an error occurs. If the status is " Reserved", a "-" (hyphen) is displayed.
Refer to "Appendix B Error Code" (page 414)
for details.
Time Stamp
The time when backup has been completed, and the time when an error occurred, are displayed.
The time stamp is updated when starting a copy session or an error occurs.
The following information is displayed:
- If the status is " Reserved", a "-" (hyphen) is displayed.
- If the status is " Active", the backup time when the copy started is displayed.
- If the status is " Error Suspend", the time when the error occurred is displayed.
Elapsed Time
The elapsed time after a session starts is displayed. If the status is " Reserved", a "-" (hyphen) is
displayed.
Copied Data Size
The size of copy that has been completed is displayed. If the status is " Reserved", a "-" (hyphen) is
displayed.
Total Data Size
The total copy size is displayed. If the status is " Reserved", a "-" (hyphen) is displayed.

Table of Contents

Other manuals for Fujitsu ETERNUS DX8100 S3

Related product manuals