EasyManua.ls Logo

Fujitsu ETERNUS DX8100 S3 - Component Status; A.5 Component Status

Fujitsu ETERNUS DX8100 S3
423 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A Status List
A.5 Component Status
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
410
A.5 Component Status
This section explains the component status.
The status of the components is displayed with an icon for each storage system image in the view screen.
In the list screen and the detailed information screen, the status of the components is displayed with an icon
and the status name.
Status Description
The component is operating normally.
The component is installed, but not used.
The component is under maintenance.
The component requires preventive maintenance.
An error has occurred in the component.
A status other than the ones listed above.
Status Description
Normal
The component is operating normally.
Unconnected
A faulty component exists in the ETERNUS DX/AF.
Undefined
The component is installed, but not used.
Undefined (Error)
The component, which is not being used, is in the error state.
Normal (Unused parts inside)
There is an unused component that is installed in the ETERNUS DX/AF.
Check1
The component is being rebooted.
Maintenance
The component is under maintenance.
Warning
The component requires preventive maintenance.
Error
An error has occurred in the component.
Unknown
A status other than the ones listed above.

Table of Contents

Other manuals for Fujitsu ETERNUS DX8100 S3

Related product manuals