Chapter 2 System Status
2.2 Network
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
45
• RCIL
Whether the Remote Cabinet Interface over LAN (RCIL) connection is enabled or disabled is displayed. (*1)
Whether RCIL is enabled or disabled is only displayed for the MNT port. The RMT port and the FST port are
always disabled.
• ETERNUS DX Discovery
Whether the ETERNUS DX Discovery connection is enabled or disabled is displayed. (*1)
The ETERNUS DX Discovery is a port to connect ETERNUS DX/AF storage systems in the network by using the
Remote Installation function.
Whether ETERNUS DX Discovery is enabled or disabled is only displayed for the MNT port. The RMT port and
the FST port are always disabled.
*1: When the SNMP connection is enabled, " " is displayed. If the SNMP connection is disabled, the field is blank.
● SNMP Information
• SNMP Function
Whether the SNMP function is enabled or disabled is displayed.
● E-Mail Information
• Notification E-Mail
Whether the E-mail notification is enabled or disabled is displayed.
To Next Page
Loading...
