Fujitsu ETERNUS DX8100 S3 - Page 80

Chapter 3 Component Status
3.1 Storage (Basic Information)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
80
The following items are displayed in the Main area:
• Storage system image
The front view of the enclosures that are installed in the ETERNUS DX/AF is displayed. The enclosure
statuses are displayed with icons. Refer to "A.5 Component Status" (page 410)
for details.
For the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS DX500 S3/DX600 S3, the ETERNUS DX8100 S3,
the ETERNUS AF250/AF650, and the ETERNUS DX200F, click the [CE] link to display the [Controller
Enclosure Detail] screen. Refer to "3.6 Controller Enclosure Detail" (page 117)
for display items.
For the ETERNUS DX60 S3/DX100 S3/DX200 S3 and the ETERNUS DX8100 S3, click the [DE] link to display
the [Drive Enclosure Detail] screen. Refer to "3.15 Drive Enclosure Detail" (page 152)
for display items.
For the ETERNUS DX500 S3/DX600 S3 and the ETERNUS AF650, specify the range for the DEs and then click
a DE to display the [Drive Enclosure Detail] screen. Refer to "3.15 Drive Enclosure Detail" (page 152)
for
display items.
For the ETERNUS DX8700 S3/DX8900 S3, the [CE/FE] button and the [DE#xx] button are displayed.
By clicking the [CE/FE] button, the CE#x (x: CE number) and the Frontend Enclosure (FE) screen is dis-
played. By clicking the CE#x, the [Controller Enclosure Detail] screen is displayed. Refer to "3.6 Controller
Enclosure Detail" (page 117) for display items. By clicking the FE, the [Frontend Enclosure] screen is dis-
played. Refer to "3.3 Frontend Enclosure" (page 100)
for display items.
By clicking the [DE#xx] button, the DEs in the relevant range are displayed. By clicking the DE#xx, the
[Drive Enclosure Detail] screen is displayed. Refer to "3.15 Drive Enclosure Detail" (page 152)
for display
items.