Fujitsu Eternus DX90 S2 - Page 57

Chapter 3 Rack Installation
3.2 Installing Controller Enclosure
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Installation-
Copyright 2013 FUJITSU LIMITED P3AM-4832-07ENZ0
57
4 Attach the flange cover that is provided with the ETERNUS DX Disk storage system.
5 For regions other than EMEA&I, attach the brackets to the rack rails (for the left and right
sides).
Use the thumb screws to attach the brackets at the specified locations on the rear side.
End of procedure
Left Right
Attachment location of the bracket
Bracket
Thumb screw
2.5" type
controller enclosure
3.5" type
controller enclosure
3.5" type
controller enclosure
2.5" type
controller enclosure