Chapter 5 Setup
5.1 Basic Setup
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Installation-
Copyright 2013 FUJITSU LIMITED P3AM-4832-07ENZ0
94
2-1 Specify the required items and click the [Next>>] button.
A confirmation screen appears.
2-2 Click the [OK] button.
The name of the ETERNUS DX Disk storage system is set and the setting completion screen appears.
2-3 Click the [Done] button.
The [Set Date and Time] screen appears.
3 Set date and time.
Set the time, date and time zone of the internal clock in the ETERNUS DX Disk storage system.
3-1 Specify the required items and click the [Next>>] button.
A confirmation screen appears.
To use the NTP function, set up the NTP function after the initial setup is complete.
To Next Page
Loading...
