Chapter 5 Setup
5.1 Basic Setup
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Installation-
Copyright 2013 FUJITSU LIMITED P3AM-4832-07ENZ0
96
6 Register the Advanced Copy license.
Click the [Skip] button to proceed to the [Register SED Authentication Key] screen.
7 Register the SED authentication key.
When Self Encrypting Drives (SEDs) are installed in the ETERNUS DX Disk storage system, register the
SED authentication key.
7-1 A message to confirm whether to register the SED authentication key is displayed. Click the
[Next>>] button.
A confirmation screen appears.
7-2 Click the [OK] button.
The SED authentication key is registered and the registration completion screen appears.
7-3 Click the [Done] button.
The [Setup Network Environment] screen appears.
When registering the copy license for ETERNUS SF AdvancedCopy Manager or ETERNUS SF Express,
refer to the manuals that are supplied with ETERNUS SF AdvancedCopy Manager or ETERNUS SF
Express.
• The SED authentication key can be registered even if no SEDs are or will be installed.
• When SEDs are already installed in the ETERNUS DX Disk storage system, a message that
requests rebooting appears. Reboot the ETERNUS DX Disk storage system.
To Next Page
Loading...
