Chapter 3 Configuration Settings and Display
3.4 Volume Management > show volume-progress
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
158
show volume-progress
This command displays the progress of formatting, migration (RAID Migration), encryption, balancing, and
Zero Reclamation for volumes.
This command is also used to display the progress of Flexible Tier Volume (FTV) processes.
■ Syntax
■ Parameter
■ Output
■ Example(s)
Encryption-related functions may not be available for some user environments.
show volume-progress [ -volume-number
volume_numbers
| -volume-name
volume_names
]
-volume-number
or
-volume-name
Optional. This parameter specifies the volume identifiers. One or more parameters can be
specified at the same time. If the volume identifier is omitted, the progress status of all the
volumes is displayed. For details, refer to "1.2.9 Volume Syntax" (page 22)
.
# show volume-progress -volume-number 1
#Volume Status Formatting Migrating Encrypting Balancing Zero Reclamation
#No. Name Progress Progress Progress Progress Progress
# 1
VOL001 Available 100% - - - -
A B C D E F G H
A: Volume number
B: An alias name of volume
C: Volume status
D: Progress status of formatting
E: Progress status of migrating
F: Progress status of encrypting
G: Progress status of balancing
H: Progress status of Zero Reclamation
The following example displays the progress status of volume #1:
CLI> show volume-progress -volume-number 1
Volume Status Formatting Migrating Encrypting Balancing Zero Reclamation
No. Name Progress Progress Progress Progress Progress
1 VOL001 Available 80% - - - -
To Next Page
Loading...
