Chapter 3 Configuration Settings and Display
3.4 Volume Management
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
186
3.4.3 ODX Buffer Volume
This section describes the commands that are related to the management of volumes for the backup area that
is used for Offloaded Data Transfer (ODX).
The functions to control ODX Buffer volumes are as follows:
• Setting the ODX mode
• Displaying the ODX mode
• Creating an ODX Buffer volume
• Setting an ODX Buffer volume
• Deleting an ODX Buffer volume
The commands that are used for ODX Buffer volumes are shown below.
Function Command
Creating volumes create odx-buffer-volume
Changing volume settings set odx-buffer-volume
Formatting volumes format volume
Expanding volumes expand volume
Displaying a list of volumes show volumes
Displaying the progress of volume processes show volume-progress
Deleting volumes delete odx-buffer-volume
Starting RAID Migration start migration
Stopping RAID Migration stop migration
Displaying a list of volumes undergoing RAID Migration show migrations
To Next Page
Loading...
