Chapter 3 Configuration Settings and Display
3.4 Volume Management > show odx-mode
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
188
show odx-mode
This command displays the operation mode for the Offloaded Data Transfer function.
■ Syntax
■ Parameter
No parameters.
■ Output
■ Example(s)
show odx-mode
# Offloaded Data Transfer Mode [Enable]
A
A: Operation mode for the Offloaded Data Transfer function
The following example displays the operation mode for the Offloaded Data Transfer function:
CLI> show odx-mode
Offloaded Data Transfer Mode [Disable]
CLI> show odx-mode
Offloaded Data Transfer Mode [Enable]s
To Next Page
Loading...
