Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > discover host-wwn-names
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
232
discover host-wwn-names
This command displays a list of the host World-Wide-Names (WWNs) discovered from the specified FC and
FCoE interface ports.
■ Syntax
■ Parameter
■ Output
■ Example(s)
discover host-wwn-names [-port {
xyz
|all|all-fc|all-fcoe}]
-port Optional. This parameter specifies the FC and FCoE interface ports to discover host WWN
names. Two or more parameters can be specified by separating them with a comma. If
omitted, all the FC and FCoE interface ports are selected.
Example: -port 000,100
For details, refer to "1.2.14 Host Interface Port Syntax" (page 25)
.
xyz "x" is the controller module (CM) number, "y" is the CA number, and "z" is the port
number.
Example: 110 (FC port#0 of CA#1 on CM#1)
all All the FC/FCoE interface ports (default)
all-fc All the FC interface ports
all-fcoe All the FCoE interface ports
# 0123456789abcdef (FC-CA)
A
A: Discovered World-Wide-Name
The following example displays a list of the host WWNs discovered from all the FC and FCoE interface ports
on CM#0 (FC 4 ports model):
CLI> discover host-wwn-names -port 000,011
CM#0 CA#0 Port#0 (FC-CA)
aabbccddeeff0011
aabbccddeeff0012
ffeeffeeffeeff03
CM#0 CA#1 Port#1 (FCoE)
aabbccddeeff0011
aabbccddeeff0012
ffeeffeeffeeff03
To Next Page
Loading...
